Model Tests and Numerical Simulations of Liquefaction and Lateral Spreading II

图书简介

This open access book presents work collected through the Liquefaction Experiments and Analysis Projects (LEAP) in 2019 (LEAP-ASIA-2019) following the LEAP-UCD-2017 whose results have been published as a first volume. In addition to the research targets set in the previous one, such as the repeatability, variability, and sensitivity of lateral spreading on mildly sloping liquefiable sand, this volume includes research efforts to validate the generalized scaling law (hereafter “GSL”) for the identical prototype with the one employed in UCD-2017. In LEAP-ASIA-2019, 10 institutes around the world conducted 23 tests in total. It was the first multi-institutional attempts to investigate the validity of the generalized scaling law for the saturated sandy sloping deposit with wide range of initial conditions. The experimental data provided a unique basis for assessing the capabilities of six different simulation platforms for numerical simulation of soil liquefaction. The results of the experiments and the numerical simulations are presented and discussed in papers submitted by the project participants.

Part 1. Overview Papers.- 1. Summary of centrifuge experiments on liquefaction-induced lateral spreading: Validation and applicability of the generalized scaling law.- 2. LEAP-ASIA-2019 Simulation Exercise: Calibration of Constitutive Models and Simulations of the Element Tests.- 3. LEAP-ASIA-2019 Simulation Exercise: Comparison of the Type-B and Type-C Numerical Simulations with Centrifuge Test Results.- 4. Dynamic Torsional Shear Tests of Ottawa F-65 Sand for LEAP-ASIA-2019.- Part 2. Centrifuge Experiment Papers.- 5. LEAP-ASIA-2019 Centrifuge Tests at University of Cambridge.- 6. LEAP-ASIA-2019 Centrifuge Test at University of California, Davis.- 7. LEAP-ASIA-2019 Centrifuge Test at Ehime University.- 8. LEAP-ASIA-2019 Centrifuge Tests at University Gustave Eiffel.- 9. LEAP-ASIA-2019 Centrifuge Test at KAIST.- 10. LEAP-ASIA-2019 Centrifuge Test at Kyoto University.- 11. LEAP-ASIA-2019 Centrifuge Test at NCU.- 12. Experimental Evaluation of Lateral Spreading of a Liquefiable Sloping Deposit Using Centrifuge and Generalized Scaling Law Tests.- 13. Centrifuge Model Tests at Zhejiang University for LEAP-ASIA-2019.- Part 3. Numerical Simulation Papers.- 14. Type-C Simulations of Centrifuge Tests from LEAP-ASIA-2019 using SANISAND-Sf.- 15. LEAP-ASIA-2019 Type-B Simulations through Strain Space Multiple Mechanism Model.- 16. LEAP-ASIA-2019 Centrifuge Test Simulation at UNINA.- 17. LEAP-ASIA-2019 Centrifuge Test Simulations of Liquefiable Sloping Ground.- 18. LEAP-ASIA-2019 Type-B Simulations through FLIP at Kyoto University.- 19. LEAP-ASIA-2019 Simulations at Tsinghua University.- 20. Class-C simulations of LEAP ASIA-2019 via OpenSees platform by using a pressure dependent multi yield-surface model.

Trade Policy 买家须知

关于产品：
● 正版保障：本网站隶属于中国国际图书贸易集团公司，确保所有图书都是100%正版。
● 环保纸张：进口图书大多使用的都是环保轻型张，颜色偏黄，重量比较轻。
● 毛边版：即书翻页的地方，故意做成了参差不齐的样子，一般为精装版，更具收藏价值。
关于退换货：
由于预订产品的特殊性，采购订单正式发订后，买方不得无故取消全部或部分产品的订购。
由于进口图书的特殊性，发生以下情况的，请直接拒收货物，由快递返回：
● 外包装破损/发错货/少发货/图书外观破损/图书配件不全（例如：光盘等）
并请在工作日通过电话400-008-1110联系我们。
签收后，如发生以下情况，请在签收后的5个工作日内联系客服办理退换货：
● 缺页/错页/错印/脱线
关于发货时间：
一般情况下：
●【现货】下单后48小时内由北京（库房）发出快递。
●【预订】【预售】下单后国外发货，到货时间预计5-8周左右，店铺默认中通快递，如需顺丰快递邮费到付。
● 需要开具发票的客户，发货时间可能在上述基础上再延后1-2个工作日（紧急发票需求，请联系010-68433105/3213）；
● 如遇其他特殊原因，对发货时间有影响的，我们会第一时间在网站公告，敬请留意。
关于到货时间：
由于进口图书入境入库后，都是委托第三方快递发货，所以我们只能保证在规定时间内发出，但无法为您保证确切的到货时间。
● 主要城市一般2-4天
● 偏远地区一般4-7天
关于接听咨询电话的时间：
010-68433105/3213正常接听咨询电话的时间为：周一至周五上午8：30～下午5：00，周六、日及法定节假日休息，将无法接听来电，敬请谅解。
其它时间您也可以通过邮件联系我们：customer@readgo.cn,工作日会优先处理。
关于快递：
● 已付款订单：主要由中通、宅急送负责派送，订单进度查询请拨打010-68433105/3213。

Model Tests and Numerical Simulations of Liquefaction and Lateral Spreading II 液化与横向扩散的模型试验与数值模拟 II：亚洲液化实验与分析项目 2019（精装） 地球科学史

Model Tests and Numerical Simulations of Liquefaction and Lateral Spreading II

液化与横向扩散的模型试验与数值模拟 II：亚洲液化实验与分析项目 2019（精装）
地球科学史