Design of Steel Structures: Materials, Connections, and Components systematically introduces the basic concepts and principles of the subject of "Design of steel structure ". This book contains 11 sections, including introduction; materials; failure modes of steel structures; members under tension, compression, bending and combined loads; steel connections, typical steel structural systems, composite members and vibrations resistance of steel members and connections. 1. General Introduction: not only the basic concept, development history and the general application of steel structures are introduced, but also the development status trend as well as the typical classifications of steel structures are specially described. 2. Materials of steel structures: different from other books, the materials of high-performance steel, cold-formed steel and other new types of steel are introduced and compared to the commonly used steel materials. 3. Possible failure modes of steel structures: the typical failure modes of steel structures are comprehensively introduced, including the instability failure, plastic collapse failure, fatigue failure, brittle fracture failure, cumulative damage failure due to cyclic loads, etc. Besides, some useful and commonly used methods are presented to prevent the failures of steel structures. 4. Members under tension and cables: both the concentrical the eccentrical tension loads are considered in this section, the effects of the bending moment is concluded in the design method according to the newest Chinese design code GB 50017-2017. 5. Members under axial compression: the typical total buckling modes of different sections are briefly introduced using the Structural Stability Theory; the 4 "column curves" are presented for determining the stability coefficient of different kinds of compression members; the limit values on height-to-thickness ratio and width-to-thickness ratio are introduced for preventing local buckling of flange and web of compression members; the "equally strong" design philosophy is introduced to design the section to different axis of compression members. 6. Members under bending: the equivalent moment coefficient is used to consider the ultimate load-carrying capacity of bending members with different boundary conditions and moment distributions; the design method of members subjected to local compression force is included in this book according to GB 50017-2017; besides, some case studies are presented for designing bending members in buildings and bridges; several practical methods that avoiding instability of bending members are introduced. 7. Members under combined tension-bending and combined compression-bending: the ultimate load-carrying capacity of members could be changed due to the combined loads, the correlation calculation formula is introduced for determining the capacities of the members subjected to combined loads; the tension-dominated, compression-dominated and bend-dominated loading conditions are individually introduced, and case studies are used to present the calculating method of those load-combined members. 8. Connections in steel structures: connection is the key technology for steel structures, a comprehensive introduction is made for different kinds of connections in beam-column joints, column-column joints and column bases; some new fabricated connecting methods as well as design methods are also included in this section. 9. Trusses, single storey steel frames, and arches: some commonly used steel structural systems are introduced in this book, the design procedures as well as the calculating methods are introduced in detail; some case studies are presented for designing these steel structures. 10. Composite members: in addition to the steel members, some commonly used steel-concrete composite members are also included in this book, including steel-concrete composite floor slabs, composite beams, composite columns, etc; a detailed introduction on calculating methods is made for these composite members. 11. Vibration resistance of steel structural members and connections: different from other books, the effects of dynamic loads on design of steel structures are considered; the hysteretic performance of steel members and joints under different loading conditions is introduced.

• 关于产品：
• ● 正版保障：本网站隶属于中国国际图书贸易集团公司，确保所有图书都是100%正版。
• ● 环保纸张：进口图书大多使用的都是环保轻型张，颜色偏黄，重量比较轻。
• ● 毛边版：即书翻页的地方，故意做成了参差不齐的样子，一般为精装版，更具收藏价值。
• 
  关于退换货：
• 由于预订产品的特殊性，采购订单正式发订后，买方不得无故取消全部或部分产品的订购。
• 由于进口图书的特殊性，发生以下情况的，请直接拒收货物，由快递返回：
• ● 外包装破损/发错货/少发货/图书外观破损/图书配件不全（例如：光盘等）
  并请在工作日通过电话400-008-1110联系我们。
• 签收后，如发生以下情况，请在签收后的5个工作日内联系客服办理退换货：
• ● 缺页/错页/错印/脱线
• 
  关于发货时间：
• 一般情况下：
• ●【现货】 下单后48小时内由北京（库房）发出快递。
• ●【预订】【预售】下单后国外发货，到货时间预计5-8周左右，店铺默认中通快递，如需顺丰快递邮费到付。
• ● 需要开具发票的客户，发货时间可能在上述基础上再延后1-2个工作日（紧急发票需求，请联系010-68433105/3213）；
• ● 如遇其他特殊原因，对发货时间有影响的，我们会第一时间在网站公告，敬请留意。
• 
  关于到货时间：
• 由于进口图书入境入库后，都是委托第三方快递发货，所以我们只能保证在规定时间内发出，但无法为您保证确切的到货时间。
• ● 主要城市一般2-4天
• ● 偏远地区一般4-7天
• 
  关于接听咨询电话的时间：
• 010-68433105/3213正常接听咨询电话的时间为：周一至周五上午8：30～下午5：00，周六、日及法定节假日休息，将无法接听来电，敬请谅解。
• 其它时间您也可以通过邮件联系我们：customer@readgo.cn,工作日会优先处理。
• 
  关于快递：
• ● 已付款订单：主要由中通、宅急送负责派送，订单进度查询请拨打010-68433105/3213。