图书简介
Dynamic Behavior of Materials, Volume 1 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the first volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers on:
Synchrotron Applications/Advanced Dynamic Imaging
Quantitative Visualization of Dynamic Events
Novel Experimental Techniques
Dynamic Behavior of Geomaterials
Dynamic Failure & Fragmentation
Dynamic Response of Low Impedance Materials
Hybrid Experimental/Computational Studies
Shock and Blast Loading
Advances in Material Modeling
Industrial Applications
?Chapter 1.Error Analysis for Shock Equation of State Measurements in Polymers using Manganin Gauges.- Chapter 2.Ballistic Impact Experiments and Quantitative Assessments of Mesoscale Damage Modes in a Single-layer Woven Composite.- Chapter 3.A Novel Approach for Plate Impact Experiments to Obtain Properties of Materials under Extreme Conditions.- Chapter 4.Effect of the Ratio of Charge Mass to Target Mass on Measured Impulse.- Chapter 5.Fracture and Failure Characterization of Transparent Acrylic based graft Interpenetrating Polymer Networks (graft-IPNs).- Chapter 6.Dynamic Crack Branching in Soda-lime Glass: An Optical Investigation using Digital Gradient Sensing.- Chapter 7.A Hybrid Experimental-Numerical Study of Crack Initiation and Growth in Transparent Bilayers Across a Weak Interface.- Chapter 8.Inelastic Behavior of Tungsten-Carbide in Pressure-Shear Shock Experiments beyond 20 GPa.- Chapter 9.Mechanical Response and Damage Evolution of High-Strength Concrete under Triaxial Loading.- Chapter 10.Heterodyne Diffracted Beam Photonic Doppler Velocimeter (DPDV) for Pressure-Shear Shock Experiments.- Chapter 11.An Optimization Based Approach to Design a Complex Loading Pattern Using a Modified Split Hopkinson Pressure Bar.- Chapter 12.Development of “Dropkinson” Bar for Intermediate Strain-rate Testing.- Chapter 13.Radial Inertia Effect on Dynamic Compressive Response of Polymeric Foam Materials.- Chapter 14.Keynote: Examining Material Response using X-ray Phase Contrast Imaging (40-min).- Chapter 15.Historical Note: Machining, Strain Gages, and a Pulse-heated Kolsky Bar.- Chapter 16.Improved Richtmyer-Meshkov Instability Experiments for Very-High-Rate Strength & Application to Tantalum.- Chapter 17.Mechanical Characterization and Numerical Material Modeling of Polyurea.- Chapter 18.Full-Scale Testing and Numerical Modeling of Adhesively Bonded Hot Stamped Ultra-High Strength Steel Hat Sections.- Chapter 19.Mechanical Characterization of ZrO2 Rich Glass Ceramic.- Chapter 20.Microstructure Characterization of Electrodeposited Nickel Tested at High Strain Rates.- chapter 21.The Flow Stress of AM IN 625 Under Conditions of High Strain and Strain Rate.- Chapter 22.Proton Radiography of Reverse Ballistic Impacts.- Chapter 23.The Effect of ECAE on the Ballistic Response of AZ31.- Chapter 24.Development of an Interferometer and Schlieren-based Measurement Technique for Resolving Cavitation Pressure Fields.- Chapter 25.Quasi-static and Dynamic Poisson’s Ratio Evolution of Hyperelastic Foams.- Chapter 26.Revisit of Dynamic Brazilian Tests of Geomaterials.- Chapter 27.Interface Chemistry Dependent Mechanical Properties in Energetic Material using Nano-scale Impact Experiment.- Chapter 28.Optimization of an Image-based Experimental Setup for the Dynamic Behaviour Characterization of Materials.- chapter 29.High Strain Rate Response of Adhesively Bonded Fiber-Reinforced Composite Joints – A Computational Study to Guide Experimental Design.- Chapter 30.Pressure-Shear Plate Impact Experiments on Soda-Lime Glass at Pressures Beyond 20 GPa.- Chapter 31.Dynamic Mechanical Response of T800/F3900 Composite under Tensile and Compressive Loading.- Chapter 32.Experimental Investigation of Rate Sensitive Mechanical Response of Polyurea.- Chapter 33.Experimental Study on Dynamic Fracture Response of Al6063-T6 under High Rates of Loading.- Chapter 34.Ballistic and Material Tests and Simulations on Ultra-High Performance Concrete.- Chapter 35.Mechanical Behavior of Ta at Extreme Strain-rates.- Chapter 36.Constitutive Modeling of Polyamide Split Hopkinson Pressure Bars for the Design of a Pre-stretched Apparatus.- Chapter 37.Investigating the Mechanical and Thermal Relationship for Epoxy Blends.- Chapter 38.A Novel Auxetic Structure with Enhanced Impact Performances by Means Of Periodic Tessellation with Variable Poisson’s Ratio.- Chapter 39.On th
Trade Policy 买家须知
- 关于产品:
- ● 正版保障:本网站隶属于中国国际图书贸易集团公司,确保所有图书都是100%正版。
- ● 环保纸张:进口图书大多使用的都是环保轻型张,颜色偏黄,重量比较轻。
- ● 毛边版:即书翻页的地方,故意做成了参差不齐的样子,一般为精装版,更具收藏价值。
关于退换货:
- 由于预订产品的特殊性,采购订单正式发订后,买方不得无故取消全部或部分产品的订购。
- 由于进口图书的特殊性,发生以下情况的,请直接拒收货物,由快递返回:
- ● 外包装破损/发错货/少发货/图书外观破损/图书配件不全(例如:光盘等)
并请在工作日通过电话400-008-1110联系我们。
- 签收后,如发生以下情况,请在签收后的5个工作日内联系客服办理退换货:
- ● 缺页/错页/错印/脱线
关于发货时间:
- 一般情况下:
- ●【现货】 下单后48小时内由北京(库房)发出快递。
- ●【预订】【预售】下单后国外发货,到货时间预计5-8周左右,店铺默认中通快递,如需顺丰快递邮费到付。
- ● 需要开具发票的客户,发货时间可能在上述基础上再延后1-2个工作日(紧急发票需求,请联系010-68433105/3213);
- ● 如遇其他特殊原因,对发货时间有影响的,我们会第一时间在网站公告,敬请留意。
关于到货时间:
- 由于进口图书入境入库后,都是委托第三方快递发货,所以我们只能保证在规定时间内发出,但无法为您保证确切的到货时间。
- ● 主要城市一般2-4天
- ● 偏远地区一般4-7天
关于接听咨询电话的时间:
- 010-68433105/3213正常接听咨询电话的时间为:周一至周五上午8:30~下午5:00,周六、日及法定节假日休息,将无法接听来电,敬请谅解。
- 其它时间您也可以通过邮件联系我们:customer@readgo.cn,工作日会优先处理。
关于快递:
- ● 已付款订单:主要由中通、宅急送负责派送,订单进度查询请拨打010-68433105/3213。
本书暂无推荐
本书暂无推荐